![background image](http://html1.mh-extra.com/html/calphalon/ckclwf3/ckclwf3_instruction-manual_3524318006.webp)
6
PREPARING YOUR PRECISION CONTROL WAFFLE MAKER
• Remove all packaging before using your waffle maker.
• Wipe Cooking Plate with a damp paper towel or soft cloth to clean. DO NOT use steel wool or other
metal pads as this may scratch the surface. Dry thoroughly and close lid.
• The exterior of the waffle maker can be wiped clean with a damp cloth.
• Place waffle maker on a flat surface and do not put anything on top of it.
• Never immerse the waffle maker, power cord or plug in water or any other liquid.
WAFFLE COOKING TIMES
NOTE:
These times are from when the unit determines batter has been added.
HOW TO USE YOUR PRECISION CONTROL WAFLLE MAKER
• Always ensure the Shade Selector Dial is turned OFF before plugging in the waffle maker.
• Use the Shade Selector Dial to select the desired shade of waffle from “LIGHT” to “DARK”. Once
selected, the preheating light will illuminate and the PREHEATING process will begin.
• We suggest using one of the middle shades when cooking your first waffle, to determine
preference. The waffle maker will adjust time based on the selected shade.
• Once the PREHEATING process is completed, the PREHEATING light will switch off and the READY
light will illuminate.
• Open the lid, pour approximately ½ cup of batter evenly on the center of each waffle square and
close the lid. The batter should just cover the peaks of the Cooking Plates. For best results, wait
until READY light is illuminated before adding batter. If batter is added prior to READY TO COOK
light being illuminated, the waffle maker may not accurately sense doneness or calculate proper
cooking time.
• Once the lid is closed, the READY light will switch off, and the COOKING light will illuminate.
• You can lift the lid during the cooking process to check on the waffle; however, it may affect the
final cooking result.
• At the end of the cooking cycle, the COOKING light will switch off, and the DONE COOKING light will
illuminate.
• Open the lid and carefully remove your waffles using non-metallic utensils.
• If you would like to make additional batches of waffles, the waffle maker may need to preheat
after cooking is complete for the previous batch. Close the lid and wait until the READY light is
illuminated again before adding batter.
• Unplug and allow to cool before cleaning.
CAUTION:
DO NOT USE METAL UTENSILS AS THEY CAN SCRATCH THE NON-STICK COATING.
Waffle Shade
Preheat
Cooking Time
Light
Yes
2 mins 30 sec.
Light-Medium
Yes
3 mins 30 sec.
Medium
Yes
4 mins 45 sec.
Medium-Dark
Yes
5 mins 30 sec.
Dark
Yes
6 mins 45 sec.