Der Drucksensor (d) muss auf der Anlage installiert
sein. Wir empfehlen stets, einen kleinen
Ausgleichsbehälter (e) (mindestens 8 Liter) hinter der
Druckseite der Pumpe zu installieren.
7. Elektrischer Anschluss
Der elektrische Anschluss muss von einem
qualifizierten Elektriker gemäß der örtlichen
Anforderungen durchgeführt werden.
Die Sicherheitsvorschriften beachten.
Den Erdanschluss durchführen.
Die auf dem beigefügten Schaltbild
aufgeführten Anleitungen beachten.
Beim elektrischen Anschluss darauf
achten, dass eventuelle Drahtabschnitte,
Ummantelungen, Unterlegscheiben oder
andere Fremdkörper nicht ins Innere des
Frequenzumwandlers fallen.
Das Klemmbrett der Speiseleitung und
des Motors ermöglichen den Einsatz von
Kabeln eines Durchschnittes von max. 2,5
mm². In diesem Fall empfehlen wir den
Einsatz von Metallspitzen.
Nicht korrekt durchgeführte Anschlüsse
können den elektronischen Schaltkreis des
Frequenzumwandlers beschädigen.
7.1. Speiseleitung
Die Speiseleitung muss mit dem im Abschnitt 4
aufgeführten übereinstimmen.
Wenn man vorhat, eine differentiale
Schutzvorrichtung zu verwenden, muss
man einen
Differentialschalter Typ A
installieren
, der gegen Fehlauslösungen
geschützt
ist
und
über
eine
Eingriffsschwelle von 30 mA verfügt.
Elektrischer Anschluss
7.2. Motoranschluss
Die Speisekabel des Elektromotors müssen direkt
an
das
Ausgangsklemmbrett
des
Frequenzumwandlers angeschlossen werden.
Um die Vorschriften elektromagnetischer
Kompatibilität zu beachten, muss man ein
dreipoliges abgeschirmtes Kabel (für
Modelle MM) oder ein vierpoliges Kabel
(für Modelle MT) mit einem externen
Schutzband verwenden.
Das Speisekabel des Motors darf nie parallel zum
Speisekabel
des
Frequenzumwandlers
entlanglaufen.
Elektrischer Anschluss
d
e
4.93.412.1
4.93.413.6
4.93.413.5
62