7
Refrigerator Features
Caution
To avoid property damage, confirm shelf
is secure before placing items on shelf.
Refrigerator Shelves
Models feature either glass or wire shelves. Shelves
adjust to meet individual storage needs.
Caution
To avoid personal injury or property
damage, handle tempered glass shelves
carefully. Shelves may break suddenly if
nicked, scratched, or exposed to sudden
temperature change.
• Remove shelves by lifting front, releasing hooks
from metal track then pulling out.
• Replace shelves by inserting hooks into metal track
and lowering front.
Crisper Drawers (Some models)
Crispers keep produce fresh longer. Wrap produce tightly.
Do not wash produce before placing in crispers. Excess
moisture could cause produce to spoil prematurely. Do
not line crispers with paper towels. Paper towels will
retain moisture.
Crisper control is located below front shelf trim. Control
adjusts humidity in crispers. Standard drawers are
permanently set at high humidity. Slide control to
high
for
produce with leaves such as lettuce, spinach or cabbage.
Slide control to
low
for produce with skins such as
3. Remove left* crisper by lifting front while supporting
underneath then pulling out. *For doors hinged on left,
remove right crisper.
4. Remove support post at recess in bottom center of
Fresh Food section.
5. Remove other crisper by sliding to opposite wall. Lift
front while supporting underneath then pull out.
6. Replace crispers and shelf by reversing steps 1-5.
cauliflower, corn or tomatoes.
Remove shelf and crispers by completing the following
steps.
1. Open left* crisper. *For doors hinged on left, open
right crisper.
Caution
To avoid personal injury or property damage,
handle tempered glass shelves carefully.
Shelves may break suddenly if nicked,
scratched, or exposed to sudden temperature
change.
2. Remove shelf by gently pushing up from underneath.
Tilt one end up then pull out.
Push
Shelf
Up
Crisper
Shelf
Deli Drawer (Some models)
• Remove drawer by lifting and pulling out. Remove
shelf by lifting front, releasing hooks from metal track
then pulling out.
• Replace shelf by inserting hooks into metal track and
lowering front. Replace drawer by sliding in.
