Pg 13
Installation (Continued)
Install the upper chimney cover:
Having the installation hardware readily
available, align the upper chimney cover
with the pre-installed (upper chimney)
mounting bracket and then screw the
hardware through the chimney into the
mounting bracket. Remove any finish
protection wrapping.
To avoid any scratching, install one
chimney piece at a time, starting with the
upper chimney. Ensure the chimney pieces
are fully fastened before moving onto any
other step.
Install the lower chimney cover:
Confirm the orientation of the lower
chimney cover; pull, stretch or flex the rear
opening of the chimney so it is temporarily
larger than the upper chimney cover,
carefully install or wrap the lower chimney
over the upper chimney cover and range
hood body. Screw in the mounting
hardware through the lower chimney
cover into the range hood body. Remove
any finish protection wrapping.
Install remaining accessories and
operation check:
Install stainless steel baffle filters then
check the operation of the range hood.
Remove any other finish protection
wrapping. Use stainless steel cleaner to
remove any finger prints or marks.
9.
10.
11.
Figure 6
Figure 7
