Calorex VPT 12, Инструкция для владельца и по установке

Страница: 5 / 28

5 1005759 ISS 1
1�2� ATTENTION
Please read the following instructions before installation,
use and maintenance.
• Installation must be carried out by competent
people, in accordance with this manual.
• A refrigerant leak test must be performed after
installation.
• Only manufacturers recommended procedures may
be used to defrost, or to accelerate the defrost of
the heat pump, to avoid damage.
• If a repair is required, please contact the nearest
after-sales service centre.
• To avoid over heating or over cooling set the
desired temperature on the control panel.
• Do not place obstructions that will block air flow
near the inlet or outlet.
• Do not use or store combustible gas or liquids near
the heat pump.
• The heating performance can be improved
by insulating the flow and return pipework. it
is recommended that a cover is used on the
swimming pool to reduce heat losses.
1�3� SAFETY
• Mains power isolator should be out of reach of
children.
• After a power cut, when the power supply is
restored, the heat pump will start up.
• Electric storms can damage electronic equipment.
Ideally the heat pump should be switched off at
the mains.
• Risk assessments must be carried out before
maintenance or repairs are started.
• If R32 gas leaks during the installation process, stop
the installation immediately and call the service
centre.