After all the mounting process is done, the unit needs to go through another thorough
checking and testing before it’s open to use.
6.1 SETTING UP AND CHECKING
1. Dust and clean the whole fitness unit.
2. Check for cracks or open areas in the painted coating.
3. Check the dial on the pylon. Turn the dial clockwise or anticlockwise to see if the turning is
smooth.
4. Check the screws and bolts. All the screws and bolts should have been be tightened and
covered with caps unless the screws have a half round head.
5. Check the plastic pipe caps.
6. Check the plastic grips and pedals.
6.2 TESTING
1. Make sure all the screws and bolts have been tightened before testing.
2. Place both of your feet on the pedals and grip the handles.
3. Move the pedals up and down and check if the movement is sooth and consistent.
4. Turn the dial clockwise or anticlockwise and check if the workout difficulty can be adjust-
ed.
5. The stepper is ready to use when all the testing has finished and no defects have been
found.
6. Should there be any malfunction, contact your dealer.
Caloo Ltd
www.caloo.co.uk | [email protected]
INSTALLATION
Model No.: CV-606 Stepper
6. POST-MOUNTING
