2.
P.A.T. with
Pulse Technology
- P.A.T. Mode is best used
when measuring the distance to a Flagstick or smaller objects.
Device will provide a short vibration to confirm that the laser
has locked on to the pin. To toggle between Standard and
P.A.T Mode, quickly
PRESS
the
Mode Button
once while
device is powered on. When P.A.T. Mode is activated, the
flagstick icon will appear on the right side and the Pulse icon
will appear on the left of the LCD display
(Fig. B)
.
MEASUREMENT MODES
1.
Standard
- Standard Mode is recommended when
measuring distances to larger objects.
(Fig. A)
3.
Scanning
- To measure distances to multiple targets in
succession,
PRESS
and
RELEASE
Power Button
to power
on.
Then
HOLD
Power Button
, the
Laser Indicator
will flash
and the laser will continuously fire. Measurements will change
as you scan the landscape and change targets. This mode will
continuously fire the laser for 3 seconds & the laser will lock on
to the closest distance during the firing period.
HOW TO USE
While looking through the
Eye Piece
,
PRESS
&
RELEASE
the
Power
Button
.The rangefinder
is now powered on.
1.
To focus/increase
clarity, use the
Diopter
Adjustment
by turning
the
Eye Piece
.
2.
Continue looking through
the
Eye
Piece
, aim the
Zero-In Aiming Square
at
your intended target &
PRESS
the
Power Button
.
The laser will fire and the
Laser Indicator
will appear
to the left of the
Zero-In Aiming
Square.
The measurement will be
displayed at the top of the LCD display.
3.
NOTE:
While scanning in P.A.T. Mode, the measurement will only
change when a shorter distance is measured. This is useful when
measuring the distance to a flagstick when there are trees or other
objects in the background.
