Callaway 300 PRO, Руководство пользователя

Страница: 6 / 12

---
Y
---
Y
MEASUREMENT MODES
1. Standard - Standard Mode is recommended when measuring
distances to larger objects.
(Fig. A)
2.
6 HOW TO USE
4. Unit of Measure - To change the unit of measure from Yards to
Meters, start with the device powered off. Then
HOLD
the Mode
Button for 3 sec. The unit of measure is indicated by a “ Y ” or “ M ”
shown directly to the right of the distance displayed.
P.A.T. with Pulse Technology - P.A.T. Mode is best used when
measuring the distance to a Flagstick or smaller objects. Device
will provide a short vibration to confirm that the laser has locked
on to the pin. To toggle between Standard and P.A.T Mode, quickly
PRESS the Mode Button once while device is powered on. When
P.A.T. Mode is activated, the flagstick icon will appear on the left
side & the Pulse icon will appear at the top of the LCD display
(Fig. B)
.
To turn Pulse ON/OFF, quickly PRESS the Mode Button Twice.
3. Scanning - To measure distances to multiple targets in succession,
PRESS & RELEASE the Power Button to power on. Then HOLD
Power Button , the Laser Indicator Box will flash and the laser
will continuously fire. Measurements will change as you scan the
landscape and change targets.
NOTE: While scanning in P.A.T. Mode, the measurement will only change
when a shorter distance is measured. This is useful when measuring the
distance to a flagstick when there are trees or other objects in the background.