ENGLISH
7
4.
Slope Mode
- Device will measure the angle of incline/decline
(Fig. B)
then calculate and display the slope adjusted distance in the bottom
right of the LCD display.
(Fig. C)
•
To turn Slope Measurement On/Off:
NOTE:
The slope measurement & adjusted yardage will appear in
the bottom right corner of the LCD display when the function is enabled
1.
With the unit off,
HOLD
the
Power Button
for
three seconds
until the slope function appears in the bottom right corner of the
LCD display. Once the slope function appears,
RELEASE
the
Power Button
.
2.
Repeat this process if you need to turn The Slope Measurement
off. The Slope function will not appear unless enabled.
5.
Unit of Measure
- To change the unit of measure from Yards to
Meters, start with the device powered off. Then
HOLD
the
Power
Button
for 5 sec. The unit of measure is indicated by a “
Y
” or “
M
”
shown directly to the right of the distance displayed.
Содержание 200 S
Страница 1: ...200S LASER RANGEFINDER...
