background image

34

Definition of Advance Routing Rule

Options 

Definition 

CalleeID/callerID 

Manipulation

A Dial Pattern is a unique set of digits that will select this route and send 

the call to the designated trunks. If a dialed pattern matches this route, no 

subsequent routes will be tried. If Time Groups are enabled, subsequent 

routes will be checked for matches outside of the designated time(s).

X matches any digit from 0-9

Z matches any digit from 1-9

N matches any digit from 2-9

[1237-9]matches any digit in the brackets (example: 1,2,3,7,8,9)

. wildcard, matches one or more dialed digits

Prepend: Digits to prepend to a successful match. If the dialed number 

matches the patterns specified by the subsequent columns, then this will 

be prepended before sending to the trunks.

Prefix: Prefix to remove on a successful match. The dialed number is com-

pared to this and the subsequent columns for a match. Upon a match, this 

prefix is removed from the dialed number before sending it to the trunks.

Mach Pattern: The dialed number will be compared against the  

this match pattern. Upon a match, the match pattern portion of the dialed 

number will be sent to the trunks.

SDfR(Stripped Digits from Right): The amount of digits to be deleted from 

the right end of the number. If the value of this item exceeds the length of 

the current number, the whole number will be deleted.

RDfR(Reserved Digits from Right): The amount of digits to be resevered 

from the right end of the number. If the value of this item under the 

length of the current number, the whole number will be reserverd.

StA(Suffix to Add): Designated information to be added to the right end of 

the current number.

Caller Name: What caller name would you like to set before sending this 

call to the endpoint.

Disabled Caller Number Change : Disable the caller number change, and 

fixed caller number match pattern.

Time Patterns that will 

use this Route

Time Patterns that will use this Route help

Forward Number

What destination number will you dial?

This is very useful when you have a transfer call.

Failover Call

Through Number

The gateway will attempt to send the call out each of these in the order 

you specify.

Содержание NX-S/O 2 Series











































Отзывы: