BIOHARMONEX 4.0
USER’S GUIDE
28
Entering the submenu shows a list of programs in the middle of the display that have been set for
autorun. If no program has been set, you can add a new program with the "+" icon in the middle of the
display.
The maximum number of programs that can be pre-set to run is 30. The user can add, delete or change
the day and starting time of any program in the automatic programming function. The settings for any
pre-set running of programs will remain as set unless the user changes it.
ATTENTION!
Automatic program running is possible only when the device is in Stand-by or Active
Mode. Automatic running is not possible when the BioHarmonex
is switched off. Replacing of
batteries does not affect or delete the automatic programming settings.
NEW PROGRAM
To set a new program to run automatically, follow these steps:
In the "PROGRAMMING" menu, touch the "+" icon.
From the "Program selection" list on the display, select the desired program. To do this, touch the
subtitle and then search the program you want to run automatically from the main program groups that
appear in the list. The grouping of programs is the same here as the program groups in the Main Menu
of the device. After you found the program, select it by tapping the icon
on the right.
Circulation-short
PROGRAMMING
DELETE PROGRAM
SET START TIME
SET PROGRAM DAYS
SELECT PROGRAM
00:00