Calivita AQUARION, Руководство пользователя

Страница: 14 / 19

A L K A L I N E I O N I C W A T E R S Y S T E M
How to Add Calcium
REGULARLY CHECK AND CLEAN YOUR PRE-FILTER
Stop the water flow prior to calcium replacement.
– Water will overflow if you open the calcium cap while
Unscrew the cap to the left and remove.
– The first time you remove it the cap
may be tight. Use a butter knife to
work it free.
Take the basket apart from the cap and dispose of the
remaining beads. The beads never completely disappear
– it’s the calcium coating on the beads that slowly releases
into the water. Beads will release calcium for about 1–2
months depending on amount of use and pH of water.
Wash the basket and remove all water.
Add the new calcium beads and close the cap.
Insert the basket into the calcium port and twist the cap
closed.
– Water will overflow if you do not close
the cap tightly.
– Keeping the pre-filter clean is critical to the proper operation of your ionizer.
– First ensure your water supply is turned off.
– Then remove the pre-filter by pressing on the end of the fitting and pulling out the hose
at the same time. Rinse out the filter thoroughly to remove any built up particulate.
– Rinse from both sides.
– Reinstall it.
– Clean the filter in this way any time you notice a decreased flow from your ionizer.
Close
Calcium
Open