0128
0129
Installation Guide
LYRA 75W
01.
01.
02.
03.
Option
A
Option
B
02.
Tightly screw the mounting clips to
the fixture.
Feed the hanging wire through the clips.
Install the light to the U shape fixture.
Hook up the hooks.
Attach the light to the mounting clips.
Clip one end of the light first then secure
the other end.
01.
01.
02.
A
B
Option
C
Connection
02.
Screw the attachment to the light
with 2 screws.
Connect plug A to plug B on each light.
There are around 4–8 plug pcs.
Link the 4–8 plug pcs on the light,
then buckle up with a short circuit cap.
If you need an extension, connect the AC wire input to the extension NEMA Plug. If you
do not need the extension, the AC Wire input can connect to the power box directly.
If you need the 0–10V dimming function, then connect the DC wire plug of the driver to
the signal end then the other end to the 0–10V dimmer.
Place the light on the fixture and adjust
the distance between each light using the
plugs, then screw down onto the fixture.
Connect
Power Supply
Please open the cable connector cap
before you connect the cable.
Cable
Connector Cap
AC Power Soure
Dimming Device