CALITEK Grizzly 600 Скачать руководство пользователя страница 9

ENGLISH

Thank you for purchasing Calitek LED multi-bar lights.

This manual describes the installation and use of your Calitek lighting equipment. Please read this manual 

carefully before installing or starting your LED system. If you are not familiar with installing high-performance 

lighting systems, it is recommended that you use qualified professionals.

HORTICULTURAL LIGHTING SYSTEM. NOT SUITABLE FOR THE ILLUMINATION OF HOUSEHOLD ROOMS.

LED LAMP FOR HORTICULTURAL LIGHTING

PRODUCT DESCRIPTION

Grizzly and Grizzly Pro are electronic horticultural LED lamps with a linear design consisting of six LED light 
bars. Grizzly and Grizzly Pro are high performance lightweight products recommended for commercial horticulture.

AMBIENT

Your Calitek lamp must be used in a climate-controlled growing location, in indoor farms or greenhouses. The 
product can be used in humid locations but should not be used in wet areas or outdoors. This product will work 

best between 20°C and 30°C. Do not exceed ambient temperatures above 35°C.
The product can be used in humid environments from 20% to 90%, without condensation

LEGAL INFORMATION

This product is CE certified in accordance with LVD, EMC and ROHS testing standards.

SAFETY RECOMMENDATIONS AND WARNINGS

Always  refer  to  local  rules  and  regulations  before  installing  or  using  this  Calitek  lamp.  -  Do  not  open  or 

disassemble the LED lamp as it contains non-replaceable parts inside. Opening or tampering with 

theCalitek  lamp  may  be  dangerous  and  will  void  the  warranty.  Do  not  use  this  Calitek  lamp  if  the 

Grizzly lamp or the power cable is damaged. If the power cable is damaged, it must be replaced exclu-

sively  by  the  manufacturer.  Modifications  to  the  cables  may  cause  undesired  electromagnetic  effects, 

which may render the operation of the product unsuitable for legal requirements. Do not expose this 

Calitek  lamp  to:  Condensed  moisture,  thick  fog  or  direct  spray;  ambient  temperatures  exceeding  those 
specified;  dust  and  pollution;  sunlight  or  HID  light  which  may  lead  to  overheating  of  the  transformer.

 

Содержание Grizzly 600

















Отзывы: