Calitec KP-50, Руководство пользователя

Страница: 3 / 16

3
Installation & Maintenance
The installation of a Calitec Hot Water System is exclusively allowed by
qualified tradesman.
It has to be done according to NZ building codes and local regulations. Do
not install the unit by yourself (customer). Incomplete installation could cause
injury due to fire or electric shock. Incorrect installation can also void the
warranty.
It is a set-and-forget system with very little maintenance. Once your installer(s)
are finished there is very little you have to do.
Maintenance of the outdoor unit:
It is very important important that the air can flow unhampered through the
outside unit. Keep it free from weeds and spider webs and don’t block it off in
any other way. A restricted or blocked air flow can result in a higher power
consumption or failure of the unit.
It is also very important that the compressor unit is fitted level. Your installer
will make sure that it is fitted correctly, but regularly check and make sure that
it remains level. The lifetime of the compressor unit will be shortened with
unlevelled operation.
Please inform your installer if you don’t think it is level anymore.
Maintenance of the hot water cylinder:
Mains pressure systems are fitted with a Pressure & Temperature Relief Valve
(PTR Valve), once a month the release mechanism on the valve has to be
activated to ensure its continuing function. When the release mechanism is
jammed, the hot water pressure in your system could become too high
causing all kinds of trouble.