California Instruments FCS Series II, Руководство пользователя

Страница: 54 / 210

User Manual – Rev B FCS Series II
4.2 Menu Structure
The next few pages show a map of the available enus in the FCS Serie e
reached by repeatedly pressing the
Menu
key. Frequently used menus have a short cut key that
provides direct access. Examples of such menus are Program and Measurements. In any case,
there are nev
m enus a ough some menus ma
more than on
4.2.1 Power on screens
m s II. All menus can b
er ore than two levels of m lth y be spread across
e screen.
At initial power up, the FCS Series II power supply will display important c
information in a series of power on screens. These displays are only visible for a short period of
time and will not re-appear until the next time the unit is turned on.
There are thr r r in the sa
1. Company n f Displays ufacturer (Cal In
California Instruments and the firmware part
starts with CIC followed by a three-digit code and dash number. The firmware revision has a
major rev o
fore the decimal point and a minor revision after the
onfiguration
ee sc eens that will appea me order:
a d irmware information. the man
number and revision. The firmware part number
st., which is short for
isi ns be decimal point.
2. Model and Serial number information. The model will be a function of
will include the series designation (FCS). The serial number is a 5 dig
number should match the model type sticker located on the back of th
t
it
he configuration and
number. This
e unit.
3. Memory test result. If all inter devices pass the power-on memory
test, the message "MEMORY TEST PASSED" will appear. If any part of the internal self-
test fails, an error message will be displayed instead. This information may be useful when
calling in for service support.
nal controller memory
Once the power on sequence is completed, the power source will always revert to the
PROGRAM screen shown here.
The power source is now ready to be used.
California Instruments 54