![background image](http://html1.mh-extra.com/html/california-instruments/801p-series/801p-series_user-and-programming-manual_3434434049.webp)
User and Programming Manual - Rev H
California Instruments
P Series
May 2000
41
6. Press “Continue” if you want to accept the default. If you want the program to
reside at a different location, type in the complete path name including hard disk
drive letter and then press “Continue”. If you want to abort the setup procedure,
click on the “Exit Setup” button. A warning will appear indicating the setup did not
complete successfully. Click on the “OK” button to acknowledge the warning. This
will take you back to the Program Manager.
7. Wait for the installation program to complete. An icon for the PGUI, the PGUI help
file and a program group will be created automatically.
8. Remove the diskette from the drive.
You are now ready to start using the PGUI software.
9.2.2 PGUI32 32 bit for Windows 95/98™ and Windows NT™
The PGUI32 software is distributed on two 3.5 inch high density floppy diskettes. The PGUI32
must be installed from these diskettes using the setup program located on disk 1 as all
required files are compressed. You cannot copy the contents of these diskettes to your PC
hard drive and run the program. To install the PGUI32, proceed as follows:
1. Turn on the PC and boot up in Windows™
2. Insert the first disk (labeled Disk 1 of 2) in drive A or B.
3. From the Windows Start Menu, select RUN.
4. At the “Open” prompt, type A:Setup or B:Setup depending on which disk drive you used
and click on the OK button.
5. Follow the instructions provided by the setup program to complete the installation. At
some point, you will be asked to insert the second disk (Disk 2 of 2). Remove the first disk
and replace it with disk 2 and press Ok to continue the installation.
6. When the installation has completed, remove the second disk from the floppy drive and
store both disks in a safe place.
Reboot the PC to activate the new settings. You are now ready to start using the PGUI32
software.
9.3 Trouble Shooting - RS232C
This section provides guidelines for resolving communication problems that may occur when
using the PGUI/PGUI32 software under Windows 95/NT
.
You may encounter problems when using the serial interface with the PGUI program that is
supplied with the interface option for this source.
Содержание 801P Series
