Technical Data
Square drive
…………………………………………………………………………1/2”(13mm)
Free speed
……………………………………………………………………………7500rpm
Max torque
………………………………………………………………………… 420ft/lb (567N.m)
Working torque
……………………………………………………………………0-370Ft-Lb (14-500 N.m)
Avg. air consumption
…………………………………………….……………………5.1 cfm (142 l/min)
Operating pressure
…………………………………………………………………… 90psi (6.5bar)
Air inlet size
……………………………………………………………………………1/4”
Air hose
……………………………………………………………………………… 3/8”ID
Weight
……………………………………………………………………..………… 4.50Lbs (2.07kgs)
Important Safety Rules
1. Always wear safety glasses, face mask or respiratory equipment.
2. Always ensure the air tool is disengaged before connecting to air supply.
3. Disconnect the air tool from the air supply before changing sockets, and before servicing.
4. Always keep your air tool clean and lubricated. Daily lubrication is essential to avoid internal corrosion
and possible failure.
5. Do not wear watches, rings, bracelets or loose clothing when using air tools.
6. Do not overload the air tool. Allow the tool to operate at its optimum speed for maximum efficiency.
7. Do not increase the air pressure above the manufacturers recommended level as excessive overload
can cause the air tool casing to split and also create excessive wear on moving parts and possible
failure.
8. In the interests of safety, always ensure that the air tool has stopped before putting it down after use.
9. Always ensure that the work piece is firmly secured leaving both hands free to control the air tool.
10. Always ensure that accessories such as blades, discs, sockets, etc. are designed for use with the air
tool and correctly attached before connecting the air tool to the air supply.
11. Keep children away from Air tools.
DO NOT allow wrench to free run for an extended period of time as this will shorten its life.
Operating Instruction
Product Description
The California Air Tools PRO 755 (1/2 Inch) Composite Air Impact Wrench is designed with the
professional in mind. The Two Twin Hammer Mechanism reduces vibration and transfers a total
output of 450 foot-pounds of torque. The built in 4 position air regulator allows for more versatility.
The soft easy to grip handle and the lightweight composite housing reduces fatigue during a job.
The wrench operates at 7500 RPM, 5.1 CFM @ 90 PSI, Air Inlet ¼"and only 4.5 pounds.
