Description:
The sturdy construction and compact design makes this product the ideal choice for both amateur
and professional.
Designed for resin casting.
An air compressor, air hose are needed to operate this tool.
Item No.
365CR
Max Pressure:
80 PSI
Capacity:
5 Gallon
Air Input:
1/4”
Exterior:
16"W & 24 1/2" H
Inner:
13"W & 14 3/4" D
Safety Guidelines:
This manual contains information that is important for you to know and understand.
This information is for your protection and safety. Improper use, operation or maintenance of this product could
result in injury or property damage.
Please Read and understand all warnings and operating instructions before use. Save these instructions.
Warning!
Over pressurization can result in explosion. Max: 80 PSI Operating PSI: 60 PSI
1.
Exceeding the Maximum pressure in the tank can cause the tank to over pressurize and explode resulting in
serious injury or property damage. Always make sure that equipment connected to tank or hose outlet has a
higher pressure rating than the regulated air pressure in the tank.
2.
Warning!
Risk of tank explosion.
1.
Modifications to the tank’s design or construction could weaken it. Assemble tank components
in accordance with the service instructions. Do not drill into tank, or weld attachments, or alter
its design in any manner.
2.
Substitution of unauthorized non-standard components could weaken tank or cause
component failure. Use only those components furnished with the tank. Assembled in
accordance with instructions in the service literature.
3.
Damage to the tank or its components could weaken the tank. Never attempt to repair a
damaged tank. Replace it with a new one.
4.
Improper cleaning or maintenance could block air passages to the safety valve, gauge or outlet,
allowing pressure to rise to dangerous levels, and preventing the lowering of tank pressure.
Содержание 365CR
Страница 7: ......
