Lectern User Manual
1
2
Thank you for purchasing the Califone
®
PL-19 Lectern.
We encourage you to visit our website www.califone.com to register your product for its warranty coverage, to sign up to
receive our newsletter, download our catalog, and learn more about the complete line of Califone
®
audio visual products,
including portable and installed wireless PA systems, multimedia players and recorders, headphones and headsets,
computer peripheral equipment, visual presentation products and language learning materials.
Unpacking the Unit
Inspection and inventory of your system. Check
unit carefully for damage that may have occurred
during transit. Each PresentationPro™ product
is carefully inspected at the factory and packed
in a special carton for safe transport.
ALL DAMAGE CLAIMS MUST BE MADE
WITH THE FREIGHT CARRIER
Notify the freight carrier immediately if you
observe any damage the shipping carton or
product. Repack the unit in the carton and
await inspection by the carrier’s claim agent.
Notify your dealer of the pending freight claim.
Warranty Registration
Please visit the Califone website to register
your PresentationPro™ for warranty coverage.
Returning your unit for service or repairs
Should your unit require service, contact your
dealer or our Customer Service Department
at (800) 722-0500 to obtain a Return
Authorization (RA) number. All shipments
to Califone must include an RA number on
the carton and must shipped prepaid. C.O.D.
shipments will be refused and returned at
your cost.
Contents
•
Lectern (shipped in two boxes – one for
the center pedestal of the lectern and the
other for the top and bottom)
•
PL-MIC Gooseneck Mic with XLR
connector
•
AC Power Cord
•
User Manual
Assembly Instructions
Assembly Tips
Assembly of Lectern is easy and should take no more than ten minutes. Please become familiar with all
instructions before beginning assembly.
Parts
(1) Reading Desk (top)
(1) Center Speaker Column (middle)
(1) Pedestal Base (bottom)
(4) 1.5” Phillips bolts
(1) 3” Height adjusting knob
Tools Required
•
Phillips-head screwdriver (not included)
Step #1: Assembling the Base with Center Speaker Column
1. Place the Center Speaker Column upside down on a soft, clean surface (such as a carpet).
2. Take the Pedestal Base and place it upside down onto the current “top” of the Center Speaker
Column (which will be the pointing down once it is inverted into its final position), lining up each
of the four holes on the Pedestal Base with the four holes on the under side of the Center Speaker
Column.
3. Insert and hand-tighten each the 1.5” Phillips bolts into each of the four holes.
4. Finish tightening all four bolts with a screw driver, making sure they are not over-tightened.
5. Gently turn the lectern over with the four wheels on the floor (right side up now).
Step #2: Attaching the Reading Desk
1. Turn the remaining part, the Reading Desk, right side up and gently rest a portion of it on the top of
the Center Speaker column.
2. Take the 2’ patch cord from the underside of the Reading Desk and connect it with the plug in the
hollow center of the top of the Center Speaker column.
3. Slip the Reading Desk into the center of the Center Speaker column. Make sure it slides all the way
down into position.
4. Secure the Reading Desk to the Center Speaker column with the 3” height adjusting knob and adjust
to the appropriate height.
5. Attach the gooseneck mic to the connection on the tabletop.
PL-19 Manual - JH 2010.03.18.indd 4-5
3/19/2010 10:01:46 AM