manualshive.com logo in svg
background image

 

POWER SOURCE: 

Unwind the A/C power adapter (located in the adapter compartment on back 

of the unit). Connect the small end of the adapter to the back of the turntable, 

then the other end to power outlet.

UNPACKING THE TURNTABLE: 

1. Carefully remove unit from it’s package and take it out of the plastic bag.

2. Open lid, remove black tie-wrap by untwisting and gently sliding out 

    from under tone arm.

3. Remove cardboard shipper.

4. Slightly lift up the needle protector below the needle.

5. Using your fingers, release the two large chrome security screws located on 

    both side turntable platform (2). Do not force it. This allows turntable to float 

    on its shock absorbers.

6. Release tone arm hold down clip by gently pushing to the right. This will 

    unlock tone its arm rest.

Note: Remember to lock the hold down clip(5) and 2 chrome security 

             screws (8) before the unit to another location.

TURNTABLE OPERATION

1. Turn the unit on by turning the ON/OFF VOLUME(12) knob clockwise.

2. Set SPEED CONTROL switch(7) to desired speed (33, 45 or 78 rpm).  

    It located near cue lever.

3. Place a record on the turntable.

4. Use CUE LEVER (6) to raise the tone arm. Move the tone arm by hand out 

    over the  and slowly lower it using the cue lever. Readjust the volume to 

    desires level by turning ON/OFF VOLUME (12) knob.

5. At the end of the record, the tone arm will automatically return to its arm rest.

6. Use the TONE control (11) to adjust the sound quality.

ACCESSORIES

ADAPTER FOR 45 RPM

To play the 45 rpm record, place the ADAPTOR (1) on the SPINDLE (3).

NEEDLE

Part# 007-1005-00

1005AV 

Record player

LOCATION OF PARTS

1. ADAPTOR FOR 45 rpm RECORDS

2. PLATTER

3. CENTER SPINDLE

4. TONE ARM

5. TONE ARM REST

6. CUE LEVER

7. SPEED SELECT SWITCH

8. SECURITY SCREW

9. ADAPTER JACK

10. ADAPTER COMPARTMENT

11. TONE CONTROL

12. ON/OFF VOLUME KNOB

TROUBLESHOOTING GUIDE

The unit will not operate, try the following tips:

1.  Check the unit is properly connected 

     to an A/C outlet.

2.  Make certain that the small end of the 

     adapter is plugged into the power

1005AVrev3.indd   2

1/31/06   12:26:41 PM

Отзывы: