RMD 212 • MANUAL
1
Owner’s Manual
1. Choose Radio Band
Press the BND Button anytime to ac-
cess the radio function.
The unit comes with five bands- three
FM Bands (FM1, FM, and FM3) and
two AM Bands (AM1, and AM). Each
of the five bands can store up to six
preset stations, for a total of 30 preset
memory stations.
2. Radio Tune / Seek Function
In Radio Mode, turn the “>>| ” or “|<<“
once, the radio frequency will proceed
by one step.
Press and hold the SEEK |<< or >>|
Button for seconds and the radio
will seek the next strong and clear fre-
quency station. Repeat to seek more
stations in your listening area with a
strong signal.
3. Mono / Stereo Reception Control
In FM radio mode, Press SEL But-
ton repeatly until the display shows
‘MONO’ or “STEREO”. Roate the Vol
button to choose the reception con-
trol, the word “MONO” shown on the
screen indicating the mono reception
is received.
4. Save Your Preset Stations
There are six numbered preset but-
tons which can store and recall sta-
tions for each band. While listening to
a radio station you would like to save
as a pre-set, press and hold one of
the buttons numbered 1-6 until the
preset station number is shown. The
button you pressed is now the pre-set
button for that station.
5. Automatic Store / Preset Scan
A. Automatic Scan & Store
While listening to the FM Radio, press
and hold the F/PS Button for 3 sec-
onds. The receiver will automatically
scan and save the station listening
to.
While listening to the AM Radio, press
and the F/PS Button for 3 seconds.
The receiver will automatically scan
and save the station you are listen-
ing to.
B. Scan Saved Stations
Press the F/PS button once to per-
form the scanning functions. In FM
mode, press the F/PS button and
the stations in that FM band will
be scanned; press the button in AM
mode and scan the band stations of
that AM Band.
6. Local / DX
Press SEL Button repeatly until the
display shown “LOC”. Rotate the VOL
button to choose “LOC ON“ or “LOC
OFF”.
a. “LOC ON” showing on the display,
means local reception is turned on;
b. “LOC OFF” showing on the display,
means distant reception is turned on.
Local and distance reception set-
ting can facilitate the radio reception,
depending on the location in which
the radio is being used.
7. Reseting The Unit
When the unit is off, press and hold
MOD+BND button for 3 seconds. The
unit will reset itself and all the pre-
vious saved radio stations will be
cleared.
Radio Operation