21
User-Defined Wallpaper
1. Touch the [
] icon on the nether left of main menu to change
wallpaper.
2. Load picture from SD Card and use it as wallpaper
If you insert the SD Card with pictures in it after your entry, you
may have to wait several seconds for the SD Card reading.
Otherwise you may use it directly.
To Select a picture in SD Card, you should touch “ Browse SD Card” button first, then the
directories and the files will be listed. If you select a directory and then touch [ √ ] button, you
will enter the directory. If you select a picture and then touch [ √ ] button, the picture will be
loaded into the flash and used as current wallpaper at the same time.
Touch the button below [ √ ] to go back to view the pictures in flash.
Touch the button at the right side of the display of directory to go back to the upper directory.
3. Use or delete pictures in flash
After the 1st step, you can see the pictures in flash listed out, you can preview them by select
one of them, then touch the [ √ ] button to use it as wallpaper.
You can also delete pictures in flash which you are not currently using. Select one and touch
the garbage box button.
Other modes
SWC
Press the desired function key of the list to the control button of the
SWC.
By the setting, you can use the button of the steering wheel to
control play, pause, select track etc.
Setting below:
To connect your steering wheel control device to the unit.
Enter the setting menu.
Touch the anyone key from“KEY 0” to “KEY 7”, and the opposite function key turns gray, font
turns bigger, touch the
[ ] / [ ]
to select the function key that you you want.
For example:
1. Touch“KEY 1”function ,
Touch
[ ] / [ ]
to select the function key [ Vol-] (shown as
below ).
2. The interface is displayed by touch [
] again.
Press the [Vol-] and the opposite function key of the SWC function
key [Vol-] for one second, and ensure the opposite connection, then
disentangle.
Touch [
] the nether left corner of the screen to exit.
You can press the anyone key of the steering wheel, if necessary.
After pressing, the opposite function settings displays, if necessary to adjust the effect.
Other opposite function settings the same as“Vol-”.
If you think setting very troublesome one by one, and may set several keys at the same time.
Press the everyone opposite function key of the SWC function key for one second, and ensure the
opposite connection, then disentangle.
Содержание RDN 894BT
Страница 1: ...RDN 894BT Manual...
Страница 23: ...22 Device connections Parking Brake Cable Connections Reverse Driving Cable Connections...
Страница 29: ...28 iPod BUS MIC Appendix Overall Wiring Diagram...
Страница 30: ...CLASS 1 LASER PRODUCT...