Page 20
Bluetooth hands-free function
When link up your mobile phone to this
bluetooth hands-free system, you can dial
or receive calls via this blutetooth device
during driving.
You can also transmit the audio data(music)
from a mobile phone to the DVD tuner via
this blutetooth device.
Sound and picture will be automatically off
when there is an in-coming call. Voice
comes out from your car speakers and the
built-in microphone receives your voice.
(See the menu of the hands-free system)
Before you use bluetooth free-hands
system, between this bluetooth free-hands
system and your bluetooth mobile phone
must be connected with each other. This
process is called “Pairing”.
1.Turn your bluetooth mobile phone on and
activate pairing mode. Now your bluetooth
mobile phone searches for bluetooth
devices in the reception range.
2. Once the bluetooth free-hands was
found, please enter the pairing code “0000”
to connect both devices with each other.
When you switch the car radio into standby
mode, then turn it on again, the bluetooth
module of this car radio will establish the
bluetooth connection to mobile phone
automatically so long as you activate the
bluetooth of the mobile phone.
If connecting success, “CON OK”,
“CONNTED” will be visible on the LCD
display, and the “BT” will twinkle
continuously on the LCD display.
Otherwise, it will appear “CONT DOWN”,
“NO CONT” on the LCD display. Meanwhile,
the “BT” will not twinkle continuously on the
LCD display.
You have to active automatic call
reception so that the mobile phone
accepts incoming calls automatically
. In
many countries, this is a prerequisite for
legal operation of hands-free equipment
while driving.
1. Pairing
2. CONNECT
When mobile
phone detect the hands-free sytem, the
“CALIBER”(name of the free-hands system)
will appear on the screen of the mobile phone
3. DIAL CALL
0~9 , #
*
#
+
DEL
4. Caller ID
5. Accepting an incoming call
6.Rejecting an incoming call
7. Terminating a call
8. Call Transfer
9. BT MENU
BT MENU
3.1 Dial with the mobile phone directly.
3.2 Dial with the remote controller.
3.2.1 After connecting, press the “
”
or
push button on the front panel or on the
remote control to enter telephone number .
- Pressing and holding the
button on the
front panel, or press and hold the
button
on the remote control when you want to
input “+”.
- Simultaneously, the entered number will
be appeared on the LCD display.
- If a number is wrongly input, press the
button on the remote control to delete
the incorrect number.
3.2.2 Press the “
” button on the front
panel or remote control to dial.
When a ring comes, the caller ’s numbers
will be shown on the touch screen, you can
decide whether or not to answer, so you
avoid unnecessary trouble and disturb.
If the automatic call accept function is not
activated,when a ring comes, press the “
”
button on the front panel or remote control
to switch on the calling.
When a ring comes, press the “
” button
on the
or remote control to reject
the coming call.
During a phone call, press the “
” button
on the
or remote control to hang
up the current call.
During a phone call, you can transfer the
call to your mobile phone or the hands-free
system by pressing the “
” button on the
head unit or remote control.
At connect status, press the
button on the remote control to enter
bluetooth menu. The structure of the blue
Note:
During bluetooth mode, you should press
and hold the
button on the front panel
to to turn on or off mute function.
MUTE
front panel
front panel
Содержание RDD 788BT
Страница 2: ......