RCD 120BT • MANUAL
06
GENERAL
OPERATIONS
GENERAL OPERATIONS
FRONT PANEL RELEASE
Press REL button (2) to detach the removable front panel
SOUND ADJUSTMENT
Turn
on (3) can
adjust
the
desired
volume
quality
.
A).Press MENU button (3)
will
change
in
the
following
order
.
Option:
Volume control/MENU
R
otating this knob, you can adjust VOL/BASS/TREB/BAL/FAD . To select the
functions, press the VOL knob shortly until the desired functions are shown on the
display.
Increase or decrease the volume by turn the VOL knob right or left. These buttons
can be used to adjust the BASS, TREBLE, BALANCE and FADER.
VOL
BAS
TRE
BAL
FAD
(
Volume
)
(
Bass
)
(
Treble
)
(
Balance
)
(
Fader
)
BASS
Press MENU/VOL button(3) one time. Adjust bass level by using
MENU/VOL(3)Knob
.
TREBLE
Press MENU/VOL button(3) two times. Adjust treble level by using MENU/VOL(3)
Knob
BALANCE
Press MENU/VOL button(3) three times. Adjust sound balance between left and
right speakers by using
MENU
/
VOL(3)Knob
.
15
POWER /MOD conversion
2
.
Under power off status,short press is power on,
Under power on status,short press is switching mode,long press is power off.
MENU
/
VOL
MENU
1.Pairing connect.
Turn on car unit, put your mobile near the unit, activate your mobile bluetooth
function.Soon the phone will find the new bluetooth device "CAR AUDIO" .
Input the pairing password “8888” and clik OK. The phone will prompt the
matching successful.When the pairing connect is successful,on the LCD, it shows
BT ON, and the bluetooth logo “ ”will stop blinking .Then you may perform the
bluetooth operation.
REMARK:depend on bluetooth mobile, the bluetooth system support “HSP” “HFP”
“A2DP” and AVRCP bluetooth profile.
2.Handsfree phone service
If your mobile phone have matched with the unit. You can dial calls out through your
mobile phone. It will turn to unit automatically when calling come in and the calling
phone number will indicat on the LCD
screen.
-Press the “BAND” button shortly to accept the call .Then you can talk with the
other party through the mic on the panel.
-Press “MUTE” button shortly to reject the call when calling come in.
-Press “MUTE” button shortly to hang up after you finish the talk.
3.Advance Audio distributing profile(A2DP) playing.
Through mobile and unit A2DP connected, the music playing in mobile can turn
to the unit audio system play. Press button “ ”and “ ” in the panel can select
the music track.
-Press “ ” button shortly to pause the music playing.
-Press “BAND”(mode) longly to temporarily discommect the bluetooth.
-Press “BAND”(mode) button longly again to reconnect the bluetooth.
4.Phone number book.
This bluetooth system can automatically store incoming call numbers, up to
10 phone numbers.
-Press “MUTE”(mode) button longly to enter the phone number book and press
VOL button to look up the phone number.
-Press “BAND” button once can call out you desired phone number.
5. Interrupt bluetooth connection/reconnection.
Pressing the “BAND” button shortly to interrupt the bluetooth connection when
your are talking a call and the voice can turn to mobile speaker.
Press “BAND” button again to reconnection.
NOTE:Different mobile phone have different responses.We do not guarantee all the
operation of connectable devices.
6. How to delete stored phone number?
You jus t can store ten number of missed ,rejected and ANS
under
separately
,
and
the
first
number
will
auto
deleted
when the 11th
number
calling
7. How to use
“
Missed
”,”
Rejected
” ”
Auto ANS
”
Functions
.
Press MUTE button for 3 seconds
to
enter
into REVIEVED /MISSED/REJECTED/
ANTO .ANS .Turn
VOL
button
for choosing
the
telephone
number
.
BLUETOOTH
