Caliber HFG 509BTN, Руководство пользователя

Страница: 8 / 16

6
FIRST USE OF THE DEVICE/INTRODUCTION
Power Supply
This unit is designed to operate on AC 100-240V
～
50/60 Hz household
mains supply.
Power of Remote Control
To use the remote control, please ensure the remote control battery
CR2032 (included) is installed properly and take the insulation clarity
paper out.(Once you stop to use the remote control, please Insert in it
same as before). Replace the remote control battery when it stops
working. It is highly recommended to use a good quality button cell.
BATTERY NOTE AND CARE
!
Danger of explosion if the battery is replaced incorrectly. Replace only
with the same type battery.
!
Only use a good quality known brand battery to ensure the longest life
and best performance.
!
If the remote is not to be used for an extended period of time, remove
the battery. An old or leaking battery can cause damage to the remote
and may void the warranty.
!
Do not dispose of batteries in fire. Batteries may leak or explode.
!
Do not try to recharge batteries that are not intended to be recharged;
they can overheat, rupture and leak (Follow battery manufacturer’s
directions).
GETTING STARTED
WARNING: Do not apply power to the unit until all of your connections are
made.
1. Plug the AC cord plug into a convenient AC wall outlet.
2. The Pilot lamp on the bottom of the unit will lights up in Red color. The
unit enters into STANDYBY Mode.
3. Press the
power button turn on/off the unit.
4. Remove the AC cord out of the wall outlet if you want to switch off the
main voltage completely.