J10 Drive Interface
Connector Type: D-Sub25 female The ACU19V provides a digital signal interface based on 24V
signal level for an external drive cabinet.
pin
signal
description
type
1
Az CW
Azimuth CW Cmd
OUT
2
Az Com
Azimuth Common (0V)
IN
3
Az CCW
Azimuth CCW Cmd
OUT
4
El UP
Elevation Up Cmd
OUT
5
El Com
Elevation Common (0V)
IN
6
El DWN
Elevation Down Cmd
OUT
7
Pl CW
Pol CW Cmd
OUT
8
Pl Com
Pol Common (0V)
IN
9
Pl CCW
Pol CCW Cmd
OUT
10
Sum Lim
Sum Limit (+)
IN
14
Az FLT
Az Fault (+)
IN
15
El FLT
El Fault (+)
IN
16
E-Stop
E-Stop (-)
IN
17
Com FLT
Az El Fault Common(-)
IN
18
Sum Lim
Sum Limit (-)
IN
19
E-Stop
E-Stop (+)
IN
21
Az HSP
Azimuth high Sp Cmd
OUT
22
El HSP
Elevation high Sp Cmd
OUT
23
DRV EN
Az/El Drive Enable Cmd
OUT
24
MAINT
Maintenance (+)
IN
25
MAINT
Maintenance (-)
IN
J9 Analog beacon level input
Connector Type: D-Sub9 female The ACU19V preferably is used together with the sat-nms LBRX
beacon receiver. With the sat-nms LBRX the ACU talks though UDP or TCP over IP, no additional
cabling is required in this case. At J9 the ACU19V provides an analog interface to third party
beacon receivers.
pin
signal
description
type
(C) 2022, SatService GmbH
www.satnms.com
ACU-19V-UM-2209 Page 10/64
