Dokument
IMA 242
Rev
1
Sid
11 (16)
Mounting of the sensor
The wall plate is screwed onto the wall
A Put the top tabs of the front part into the top
The screw head diameter should be
max 7,5 mm
holes of the wall plate.
The screw head height should be
max 2,5 mm
B Press the lower edge of the case onto
the wall plate to latch
The top part is pushed under the
locking hooks of the wall plate
and is secured with a screw.
If for some reason the PCB must be removed it must be handed carefully
and protected from electrostatic discharge! Normally, removing the PCB is
not required.
A
B
