Setting a Height
The height function is used to enter a height
value for finding volume.
To set a height:
1) Press
[SET] [LxW]
to access the height
function. The appropriate annunciator
will begin flashing
FT IN
for Imperial
mode or
M
for Metric mode. An
H
will appear in the display.
2) To change the units of measurement,
press
[UNITS]
until your desired units
appear. Press the
[M+]
( ) or the
[LxW]
( ) key to begin setting the distance.
The selected digit will start flashing.
3) Press
[COUNT]
( ) to increase or
[RCL]
( ) to decrease the selected digit. Press
the
[M+]
( ) key to move to the next
digit to the right or the
[LxW]
( ) key to
move back to the left.
4) Once the desired value has been entered,
press the
[SET]
key to save and exit.
21 Scale Master
®
Pro
www.
GlobalTestSupply
.com
Find Quality Products Online at:
