Calcana SR Series, Спецификации, руководство по установке, эксплуатации, техническому обслуживанию и каталог запасных частей

Страница: 72 / 96

SR -SERIES
68
20.0
ELECTRICAL CONNECTION
Refer to rating plate on heater for electrical specifications. All electrical connections must be made by a
qualified/licensed experienced electrician.
Supply grounded, adequate electricity to the three prong electrical cord attached to the burner head.
WARNING:
DO NOT operate heater until it has been thoroughly installed, inspected and is ready
for initial fire-up.
NOTE: All electrical connections and wiring must be made in accordance as follows:
CANADA: Canadian Electrical Code, CSA C22.1 or latest edition.
USA: National Electrical Code, ANSI/NFPA 70 or latest edition
In Canada: Electrical equipment and wiring shall comply with the applicable provisions of the current
Canadian Electrical Code, CAN/CSA C22.1, Part I and Part II, and CAN/CSA C22.2 No.3, Electrical features of
Fuel Burning Equipment.
If any of the original wire as supplied with the appliance must be replaced, it must be replaced with wiring
material having a temperature rating of at least 105 degrees C (221 °F).
ELECTRICAL CONNECTION BURNER HEAD
Figure 57. ELECTRICAL JUNCTION BOX