Calca LMM-JL Series, Руководство пользователя

Страница: 23 / 49

LASER MARKING MACHINE
Sign-in-China.com
Online Wholesale for AD & Signage Products
Learn More >>
- 17 -
and have mastered the key points of laser equipment installation.
3. Tools
The installat ion tools have been provided. In addit ion, the user should prepare some
installation and testing tools if necessary, such as screwdrivers, multimeter, etc.
4. Others
The user needs to prepare the electricity, smoke exhaust channels, proofing materials,
computer and power outlets associated with the equipment.
Alarm
◆
The customer shall on site with the customer service during the complete
installation process.
◆
The installation and commissioning are part of the training, and the user
shall master.
3.1.3 Adjust the level of the machine
After the machine is moved from the crate to the workplace, the level of the machine should
be re-adjusted as follows due to differences in the workplace:
> First, adjust four feet to completely hold up the machine;
> And then, place a spirit level in the front of the machine, and observe the shift direction of
the bubbles in the spirit level. If the bubbles shift to the left, the left side of the machine is
higher than the right side. Please adjust the level of the machine by reducing the height of
the left foot or increasing the height of the right foot. When the bubble is centered in the
spirit level, the front level of the machine has been adjusted properly;
Alarm
◆
The machine level adjustment is necessary. The subsequent operation of
the machine will be affected if the machine level is quite different.
3.1.4 Installation
Now that you are familiar with the overall terminology, we will walk you through on turning
on and running your first file.
Step 1. Install the power cable
Install the power 110V input cord (circular electrical connector) into the back of the machine.
The plug will be labeled “110V Input” The other end goes into a 110VAC outlet (Illustrated in
the pictures below).