10/12/13
TTU-12x0 Hardware & Installation Guide - PULS Wiki
https://puls.calamp.com/wiki/TTU-12x0_Hardware_%26_Installation_Guide
1/36
TTU-12x0 Hardware & Installation Guide
Contents
1.1 About This Manual
1.2 About The Reader
1.3 About CalAmp
1.4 About the CalAmp Location Messaging Unit-TTU-12x0™
2.1 Overview
2.2 Component Descriptions
2.2.1 Wireless Data Network
2.2.2 TTU-12x0™
2.2.3 LM Direct™ Server
2.2.4 Backend Software
2.2.5 PULS™
2.2.6 LMU Manager™
3.1 Location Messaging Unit-TTU-12x0™
3.1.1 TTU-12x0™ Handling Precautions
3.1.2 Battery Back-up devices
3.1.3 Environmental Specifications
3.2.1 Primary Connector
3.2.2 Serial Adapter
3.2.3 Accessories
3.3 GPS Receiver
3.4 External RF Connector
3.5 I/O Descriptions
3.5.1 Motion Sensor Input
3.5.2 Power State Input
3.5.3 Battery Voltage Critical Input
3.5.4 High Temperature Input
3.5.5 Ignition and Inputs
3.5.6 Outputs
3.5.7 Status LEDs
4 Configuration and Activation
4.1 Quick Start - General Config
4.2 Auto provisioning of GSM or HSPA LMUs
4.3 Activating GSM or HSPA LMU using AT Commands
4.4 Accessing the SIM
4.5 Activating a CDMA TTU-12x0™
4.5.1 Activating a CDMA TTU-12x0™ – Verizon
4.5.2 Activating a CDMA TTU-12x0™ – Sprint
4.5.3 Activating a CDMA TTU-12x0™ – Bell Mobility
5.1 Preparing for Installation
5.2 Plan The Installation
5.2.1 Size and Placement of LMU Unit
5.2.2 Placement of Antennas
5.2.3 Access to the SIM (Subscriber Identity Module) Card
5.2.4 Protection from Heat
5.2.5 Visibility of Diagnostic LEDs