CalAmp SMC-GPRS Series, Руководство пользователя

Страница: 45 / 84

001-0004-829 Rev00
Page 45 of 84
Internal Internet Service Commands
A brief description of the internet service commands are provided in Table 10.10. For futher
information, refer to the Cinterion TC63i AT Command Set document available from Cinterion
[2]
.
Table 10.10: Internet Service Commands
Command Description
AT^SICC
Internet Connection Close:
The write command releases a connection opened with AT^SICO and restores
the previously set inactivity timeout "inactTO" of the selected connection profile.
AT^SICI
Internet Connection Information:
The read command requests the current status of the Internet connection
profiles currently defined with AT^SICS. The write command displays the status
of the specified Internet connection profile.
AT^SICO
Internet Connection Open:
The write command opens a connection profile (also referred to as bearer). A
connection opened with AT^SICO remains open until closed with AT^SICC or, in
case of inactivity, disconnected by the network.
AT^SICS
Internet Connection Setup Profile:
The command serves to create and edit Internet connection profiles.
AT^SISS
Internet Service Setup Profile:
The command serves to set up the necessary parameters in the Internet service
profiles.
AT^SISE
Internet Service Error Report:
The write command returns the current error status of the specified Internet
service profile.
AT^SISO
Internet Service Open:
The write command starts the Internet session configured by the service profile.
AT^SISC
Internet Service Close:
The write command performs all necessary action to release all properties
activated by AT^SISO.
AT^SISI
Internet Service Information:
The read command requests the current status of all defined Internet service
profiles. The write command requests the status of the specified Internet service
profile.
AT^SISR
Internet Service Read Data:
The write command triggers reading data via the Internet service configured
with AT^SISS.
AT^SISW
Internet Service Write Data:
The write command triggers writing data via the Internet service configured
configured with AT^SISS.
At^SISX
Internet Service Execution:
The write command sends ICMP (Internet Control Message Protocol) Echo
Requests to a target IP address or host name (also referred to as Ping
command).
AT^SISX=”Ping”,0,<host name or IP address>