LMU Controller
© Safe Fleet | May 2022 | All rights reserved | Part #: 700-1284 R1
p. 8
Installation
LMU Connection Retrofit Setup for Previously Installed Video Recorders Without 2x2 pin GPS Socket
GPS4-CBL
(20ft / 6.1m)
GPS4 Extension Cable
060-1231
(1ft / 0.3m)
Adaptor Harness
(LMU to Expansion)
060-1059
Expansion Harness
Black wire fr
om pin 16
to black on
extension cable
Aux 1
Cable Harness
and Connector
LMU Controller Connections
Retr
ofit System Setup
LMU
to GPS
Adaptor
Cable
Power Harness
060-1018
060-1012
LMU Controller
VLP-LMU26M
LMU Controller
Harness LED end
Comm LED
GPS LED
1x5 Microfit
connector
2x2 Microfit
connector
2x2 Microfit
connector
1x4 Microfit
connector
Pin 1
Pin 1
Pin 11
Pin 11
Pin 10
Pin 10
Pin 20
Pin 20
Pin 16 -
Alarm Button
(black wire, active low)
Pin 3 -
Stop Arm
(blue wire, active high)
Orange wire fr
om pin 12
to red on
extension cable
Pin 12 -
Alarm Button
(orange wire, active low)
Battery Negative (black)
V 12/24V (red)
Ignition (white)
3 wires
3A
3A
Red, black, white wires
Alarm Button
060-0061
Alarm Button / Extension Cable
To connect the extension cable, use
supplied butt connectors (2x) to
connect the alarm button flying leads
to the extension harness flying leads
(Red to Red, Black to Black). Cut the
2x1 Molex connector off the extension
cable and use supplied butt connec-
tors (2x) to connect the extension
harness red wire to the LMU harness
pin 12, orange wire. Then, connect the
extension harness black wire to the
LMU harness pin 16, black wire.