background image

8/18/2021

LMU-2600 Hardware & Installation Guide - PULS Wiki

https://puls.calamp.com/wiki/LMU-2600_Hardware_%26_Installation_Guide

20/44

o Username: vodafone
o Password: vodafone

Vodafone New Zealand (MCC 530, MNC 01)

o APN 0 & 1: internet
o Username: guest
o Password: guest

Vodafone UK (MCC 234, MNC 15)

o APN 0 & 1: internet
o Username: web
o Password: web

Unless otherwise stated, the username and password will be set to “dummy”.

This feature can be disabled by setting Bit 0 of S-Register 155.

AT$APP PARAM 1024,35,1,1 

To re-enable auto-provisioning, use:

AT$APP PARAM 1024,35,1,0 

Auto-provisioning occurs when the LMU detects a SIM with a new operator ID (i.e. the first 6 digits of the
IMSI) or when Bit 0 of S155 is cleared and the GPRS context is blank (i.e. Parameter 2306,0).

4.3 Activating GSM or HSPA LMU using AT Commands

Check with the CalAmp Sales team for availability of the LMU-2600™ with GSM or HSPA modems.

For a GSM/GPRS operator you will get the LMU in one of two varieties, one with a SIM and one without.

If you get an LMU without a SIM (which is the typical case) the operator will simply ask for the IMEI of the
LMU. The IMEI (International Mobile Equipment Identifier) is printed on the bottom of the LMU under the
LMU’s ESN. Again, DO NOT give the operator the ESN of the LMU.

The operator will provide you with a SIM for each account activated. If they are especially nice (or you are
especially persistent) they will also give you a list tying the IMSI (International Subscriber Identifier) of the
SIM to the phone number assigned to it. Please note that the operator will likely tie the IMSI (i.e. the SIM) to
a specific IMEI. Making sure the specific SIM matches to the right IMEI isn’t strictly necessary, but it will
keep everyone’s book-keeping a little cleaner. You may also obtain this information by running a CSV report
in PULS (after the devices have connected to the network and sent in their first ID Report). See the PULS
Users Guide for more information.

If you do happen to have a SIM, the operator will ask for the IMSI and ICC-ID (Integrated Circuit Card
Identifier) along with the IMEI of the LMU. Again, in return you should get a list of IMSIs and Phone
Numbers.

Содержание LMU 2600 Series













































Отзывы: