20
The Fusion LTE Web interface is divided into two sections. On the left is the main navigation panel (shown in Figure 9). On
the right is the content area for the desired page.
2.6
LTE CONNECTION
Before you begin this step, you will need an LTE contract with a carrier and an active SIM card.
On the left side of the screen, select
WWAN0
. This will bring up the
WWAN0
status page. Select the
Carrier Settings
tab.
On the
Carrier Settings
page, enable the Interface and Provider #1 (If not done by default). You will have to hit save after
each change.
The
APN
,
User
and
Password
should be left blank unless you have received specific values from the Carrier. In most cases,
Authentication should be left as
Any
.
It may take several minutes to establish the connection after it has been enabled for the first time. Verify the connection is
active by click on the
Status
tab. See below.
