CalAmp FOB10-BL, Руководство по аппаратному обеспечению и установке, Страница: 11 / 28

Configuration for each button
configuration units / bit size (bytes) default
Event Generation mask (see below) 1 00111100
Generate events on
releasing button from
short press & when long
pressed & keep
generating long press
events until button is
released.
Event generation mask for each button coded as 1 byte
description mask (top 2 bits are reserved)
generate message on min short press timeout 00xxxxx1
generate message on short press repeat timeout 00xxxx1x
generate message on short press release 00xxx1xx
generate message on long press timeout 00xx1xxx
generate message on long press repeat timeout 00x1xxxx
generate message on long press release 001xxxxx
Keyfob configuration
Stored on individual Keyfobs.
units / bit size (bytes) default
Short Press minimum 100ms 1 2
Short Press Repeat 100ms 1 2
Long Press time 100ms 1 15
Long Press Repeat 100ms 1 5
beacon interval 1ms 1 8750
beacon duration after keypress 1s 1 0 (always and forever)
CID n/a 2 0xFFFF
(0xFFFF is special case and is
always processed) otherwise
this CID must match the CID
in the LMU
Tx power db 1 0
Low Battery LED blink % % 1 20
Button push LED blink n/a 1 0x07 all 3 buttons cause blink
when pressed (0x0f if 4
buttons)
Config button 1 (see above) n/a 1 0x3c
Config button 2 (see above) n/a 1 0x3c
Config button 3 (see above) n/a 1 0x3c
reserved (for 4
th
button) n/a 1 0x00