© 2015 CALAMP
/
MBUD-0278v1 | 05/2015
WWW.CALAMP.COM
Questions? Call: 888-823-7237 or Email: [email protected]
STEP TWO: INSTALL THE CVF-200 AND OPTIONAL OUTPUTS
CalAmp recommends power generation from the vehicle’s ignition harness. This is required for with use with the Starter
Disable relay, Payment Reminder Buzzer and Tow alert.
Note:
Verify that the white wire is powered only with the key in the Engine On condition, not the ACC or radio key position.
STEP THREE: ACTIVATE DEVICE AND TEST
Before testing the device’s cellular and GPS signal strength,
confirm that both LED lights on the device are solid and the
device is installed in its final location within the vehicle
. The
device must acquire a GPS signal and communicate with the
wireless network.
Note:
Confirm with the Lender for pre-funding
requirements and which functions to apply.
Two options for activating and testing devices:
•
Installation Portal within the LenderOutlook application
•
MobileInstall app, available as a free download from the
Google Play Store.
LenderOutlook Installation Portal
MobileInstall app
