CalAmp 520005-1 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 9

CalAmp 520005-1 Скачать руководство пользователя страница 1

131908/2

C+A

1

C+A

TRANSCEIVER INSTALLATION GUIDE

____________________________________________________

The installation of California Amplifier transceiver products should only be done
by qualified personnel, and should be under the direct guidelines of the system
operator. These installation instructions apply to California Amplifier products
only. Use of these instructions to install other manufacturer’s products may
result in unknown hazards, damage and/or unacceptable performance.

The information contained in this applications note is intended to assist the
operator in developing a set of installation guidelines and operating practices for
the field personnel skilled in installing roof top subscriber equipment.

California Amplifier accepts no responsibility for claims of injury, death,
destruction of property or loss of television service related to improper
installation, or installation of equipment by staff not skilled in installing roof top
cable television equipment.

460 Calle San Pablo, Camarillo, California 93012 USA PH: (805) 987-9000 Fax (805) 987-8359

1
2
3
...
»

Содержание 520005-1










Отзывы:

Нет отзывов