background image

2020 Portable Spas - LAF

LTR20201163, Rev. E

W

ater Clarity

www.calspas.com

39

This section is intended for new spa owners with no 

experience with water chemistry. Everyone’s experience 

with  maintaining  water  quality  is  different,  but  there  are 

some general concepts you need to know.

Water  maintenance  is  not  difficult,  although  it  requires 

regular attention. The most important thing to understand 

about taking care of your spa water is that preventive action 

is much easier than correcting water quality issues.

Before you begin, we recommend you become familiar with 

some  water  quality  terms  and  their  definitions  (see  next 

page).

Whether you’re filling your spa for the first time (see page 

7)  or  refilling  it  after  draining  it  for  regular  maintenance 

(see page 51), start and maintain your spa water by 

following the plan we describe in this section. 

Water Clarity

Chemical Balance

See page 41 to learn how to balance your spa 

water.

You  will  need  to  test  and  adjust 

the chemical balance of your spa 

water. Although this is not difficult, 

it needs to be done regularly.
You need to test the level of 

calcium hardness, total alkalinity, 

and pH.

Spa owners with a bromine generator also need to check 

total dissolved solids and phosphates.

Sanitation and Shock

See page 43 to learn how to 

use sanitizer and shock.

Sanitizers kill bacteria and viruses 

and keep the water clean. A low 

sanitizer level will allow microbes to 

grow quickly in the spa water. We 

recommend using either chlorine or 

bromine as your sanitizer.
You also need to add shock to the water to stimulate the 

chemical sanitizer. How much you use and how often depend 

on 

frequency and intensity of use.

Spa owners with an ozonator also need to add sanitizer, 

although their requirements are different.

Filtration

See  page  44  for  filter  cleaning 

instructions.

Cleaning  your  filter  regularly  is  the  easiest 

and most effective single thing you can do to 

keep your water clear.

A clogged or dirty filter will cause the heater 

and pump to work harder than they need to, 

possibly causing them to fail.

The spa’s heating system will only function with the 

proper  amount  of  water  flow  through 

the system.

Regularity

See page 45 for the  schedule  of  

recommended maintenance.

Clear water requires regular maintenance. Establish a 

routine based on a regular schedule for your spa water 

maintenance.

1

3

4

2

Maintaining your water quality helps the enjoyment of your spa and extends your spa’s life by preventing 

damage from neglect and chemical abuse.

Water Quality Terms and Definitions

The following chemical terms are used in this section. Understanding their meaning will help you to better understand clear 

water maintenance. Words in bold type are defined in this table.

Bromine / 

Bromamines

Bromine

 is an efficient sanitizer chemical for spas. When used as a 

sanitizer

, bromine forms compounds 

called bromamines. Bromine can be added to the spa or automatically generated. See page 43 for discussion 

on 

sanitizers

Bromamines are compounds formed when bromine combines with nitrogen from body oils, perspiration, etc. 

Unlike chloramines, bromamines have no pungent odor and are effective 

sanitizers

.

Chlorine / 

Chloramines

Chlorine

 is an efficient sanitizing chemical for spas. We recommend using sodium dichlor-type granulated 

chlorine because it is totally soluble and nearly 

pH

 neutral. When used as a 

sanitizer

, chlorine forms 

compounds called chloramines. See page 43 for discussion on 

sanitizers

Chloramines are compounds formed when chlorine combines with nitrogen from body oils, perspiration, etc. 

Chloramines can cause eye irritation as well as having a strong odor. Unlike 

bromamines

, chloramines are 

weaker, slower 

sanitizers

. To remove chloramines, see the description of 

shock

 below.

Содержание PATIO

















































































Отзывы: