CR3049HOSPR
S
& CR3077SP
AS
INSTALLATION INSTRUCTIONS
PUSH SIDE MOUNTED(PARALLEL ARM)
HOW TO DETERMINE
HAND OF DOOR
RIGHT
HAND
DOOR
LEFT
HAND
DOOR
CLOSER CONTROL DIAGRAM
BACK CHECK
MAIN SPEED
LATCH
SPEED
DECREASE
SPRING
POWER
C.C.W.
MAXIMUM DOOR
WIDTH
FULL
TURNS
REQUIRED
EXTERIO
R DOORS
EXTERIOR
DOORS
--------
5 lb-f*
5 TURNS C.C.W.
8.5 lb-f*
34"(864)
2 TURNS C.C.W.
30" (762)
38"(962)
0 TURNS
36"(914)
48"(1219)
5 TURNS C.W.
42"(1067)
54"(1372)
10 TURNS C.W.
48"(1219)
60"(1524)
15 TURNS C.W.
INSTALL ON DROP PLATE
(FOR NARROW RAIN INSTALLATION)
STANDARD INSTALLATION
GENERAL NOTES
The Cushion Arm Closer is non-handed and is designed to meet entrance
accessibility requirements. Determine hand of door first before installation.
Refer to illustration (right), then the proper installation template.
The Cushion Arm Closer can be adjusted to handle all exterior doors up to
4'0" and interior doors up to 5'0" wide. Adjust the spring power as shown
before installing the closer. Turn the spring adjustment nut clockwise or
counter-clockwise to the required number of turns to match door width as
indicated in the chart below.
ALLEN
WRENCH
INCREASE
SPRING
POWER
C.W.
IMPORTANT -
When adjusting spring power DO NOT exceed the
maximum number of turns in either direction. Doing so may damage the closer
* Opening force on 36" Door
DWG # DCG10
20
-
1/3
-
APR
2022
