7
Disabling a User Code: Program 3xx
Disable Users in One Bank: Program 3x#
Disable All: Program 3##
Enable One Manager or User Code: Program 4xx
This feature can be used by Master, Sub-Master or Manager Codes. User Codes can only be enabled by the Manager in charge of his Bank.
Master and Sub-Master can enable all Managers and Users.
[Master, Sub-Master, Manager Code] (#) (4) [2-digit Location]
EXAMPLE:
Assuming that the current Master, Sub-Master or Manager Code is (1) (2) (3) (4) (5) and you want to enable a User Code located at location 21.
1.
Press (1) (2) (3) (4) (5)
Ɣ
(#) (4) (2) (1)
ƔƔ
2.
User Code at the specified location is enabled.
User Codes are located at locations 01-09, 11-19, 21-29, 31-39, 41-49, 51-59, 61-69, 71-79, 81-89 and 91-99 (see table 1A on page 11).
[Current Master/Sub-Master/Manager Code] (#) (3) [2-digit Location Code]
EXAMPLE:
Assuming that the current Master, Sub-Master or Manager Code is (1) (2) (3) (4) (5) and you want to disable a User Code located at location 21.
1.
Press (1) (2) (3) (4) (5)
Ɣ
(#) (3) (2) (1)
ƔƔ
2.
User Code at the specified location is disabled.
Banks are designated as numbers from 0-9. For instance, Bank “0” will have its manager ”00” and users 01-09; Bank “1” has Manager “10” and
Users 11-19 and so on.
[Current Master/Sub-Master/Manager Code] (#) (3) [1-digit Bank Number] (#)
EXAMPLE:
Assuming that the current Master, Sub-Master or Manager Code is (1) (2) (3) (4) (5) and you want to disable “Bank 1”.
Press (1) (2) (3) (4) (5)
Ɣ
(#) (3) (1) (#)
ƔƔ
NOTE: If Master or Sub-Master Code was used to unlock the unit prior to the program sequence, all 9 Users and 1 Manager Code in that
Bank are disabled.
If the Manager Code was used to unlock the unit prior to the program sequence, only the 9 users in that bank are disabled.
If Master or Sub-Master Code was used to unlock the unit, it will disable all 100 Users/ Managers and will clear all 5 Service Codes.
[Current Master/Sub-Master Code]
Ɣ
(#) (3) (#) (#)
ƔƔ
If Manager Code was used to unlock the unit, it will disable the users under that manager.
[Manager Code]
Ɣ
(#) (3) (#) (#)
ƔƔ
NOTE: Managers cannot disable themselves.
