5/16 OR 8mm
HEX WRENCh
THE HAND MUST BE CORRECT BEFOR THE BRACKET IS MOUNTED
TO THE DOOR STOP (TOP JAMB).
Refer to page 1.
FOR LEFT HAND DOORS:
All bracket are shipped assembled for LEFT HAND DOOR. Insert 5/16"
(8mm) hex wrench into ARM STOP and turn anti-clockwise to seat as tightly
as possible.
Push filler plug in firmly.
FOR RIGHT HAND DOORS:
Push filler plug out of bracket
Using a 5/16" (8mm) hex wrench turn ARM STOP clockwise to remove from
bracket insert in hole marked "R". Turn hex wrench clockwise to seat ARM
STOP as tightly as possible. Push filler into other hole.
BRACKET
ARM STOP
FILLER PLUG
CAUTION
IMPROPER INSTALLATION OR REGULATION
MAY RESULT IN PERSONAL INJURY OR
PROPERTY DAMAGE. FOLLOW ALL
INSTRUCTIONS CAREFULLY.
HOLD OPEN CONTROL
HANDLE (HOLD OPEN ARM)
stud
FOREARM
MAIN ARM
COVER
SHAFT
SCREW
DELAYED
VALVE
CLOSING SPEED
VALVE
INSTALLATION SEQUENCE
LEFT HAND DOOR SHOWN - RIGHT HAND DOOR OPPOSITE
1.
Using template dimensions shown above, mark FOUR (4)
HOLES
ON DOOR for door closer and THREE (3) HOLES
ON FRAME for parallel bracket.
2.
Mount closer on door using screws provided. SPEED ADJUSTING
VALVE MUST POSITIONED TOWARD AWAY FROM HINGE
EDGE.
3.
Adjusting spring power to match door width or weight as
indicated
by Power Adjustment Chart shown on page
2
.
4.
Mount closer on door to dimensions shown on page
2
.
Do not allow door to slam into frame.
A normal standard closing time from 90º open position is 5 to 7
second evenly divided between main closing (sweep) speed and
latching speed Adjust the CLOSING speed first, then adjust the
LATCHING speed.
This function is essential to the proper operation of the SUPER
RIGID PARALLEL ARM. Use just enough to prevent arm to striking
stop with impact. See page
2
.
Install cover securely using screw provided.
A quarter turn on the HOLD-OPEN CONTROL HANDLE engages or
disengages hold-open.
HOLD
OPEN
LATCHING
SPEED
VALVE
BACKCHECK
VALVE
INSTALLATION INSTRUCTIONS:
':*'&*
02
6
3
/3
A
P
R
