Cal Flame G3, Руководство пользователя, Страница: 15 / 28

Using
Your Grill
13
2009 G3, G4, G5 Grills
LTR20091050, Rev. A
www.calspas.com
Electronically Lighting the Grill
Open the hood. 1.
Keep your face as far away from the burners as possible. 2.
Rapidly rotate the burner knob counter clockwise past the light 3.
position to HIGH. You will hear a loud click as the electronic
lighter produces a spark.
Listen for the sound of the gas igniting. If the burner does not 4.
light on the first try, repeat immediately.
If the burner does not light after three attempts, turn the control 5.
knobs to the OFF position. Wait five minutes until the gas clears
before attempting to light it again.
Repeat the procedure or try the manual lighting procedure 6.
below.
Upon successful lighting, repeat the process on the other burners 7.
you wish to light.
To shut off the burners, rotate the knob and turn to OFF. It is 8.
normal to hear a popping sound when the burners are turned
off.
Each time you light the grill, check the following:
Inspect the hose before using the grill. If there is excessive abrasion •
or wear, or if the hose is cut, it must be replaced prior to using
the grill. If you need a replacement hose, contact your Cal Flame
dealer.
Ensure the area around the barbecue is clear of flammable •
substances such as gasoline, yard debris, wood, etc.
Ensure there is no blockage of the airflow through the vent space •
located below the face of the unit.
Ensure the burner flames burn evenly along both sides of each •
burner with a steady flame (mostly blue with yellow tipping). If
burner flames are not normal, check the orifice and burner for
insects or insect nests.
Ensure the in-line gas valve or gas cylinder valve is always shut
•
OFF when the barbecue is not in use.