Cal Flame BBQ08852P, Руководство пользователя

Страница: 3 / 28

Saf
ety Instructions
1
Cal Flame Side Burners
LTR50001082, Rev. B
www.calspas.com
Safety Instructions
WARNING: Improper installation, adjustment, altera-
tion, service or maintenance can cause injury or property
damage. Read the installation, operating and maintenance
instructions thoroughly before installing or servicing this
equipment.
Placement and Location
C • al Flame side burners are designed for outdoor use only .
Never locate this appliance in an enclosed room, under a sealed •
overhead structure, or in any type of enclosed area such as a ga-
rage, shed, or breezeway. Keep clear of trees and shrubs.
Do not place a side burner under or near windows or vents that
•
can be opened into your home.
Cal Flame side burners are not intended for installation in or on
•
recreational vehicles or boats.
Maintain sufficient distance as to not overheat any overhead com - •
bustible material such as a patio cover.
The area surrounding your new side burner should be kept clean
•
and free from flammable liquids and other combustible materials
such as mops, rags or brooms, as well as solvents, cleaning fluids,
and gasoline.
Do not use the side burner or area surrounding the side burner
•
as a storage area for flammable or plastic items. Do not store the
liquid propane (LP) cylinder in the vicinity of this or any other ap-
pliance when it is not being used.
Set-Up
We recommend that a licensed contractor install your Cal Flame •
side burner. Installation must conform to local codes, or in the
absence of local codes, with either the
National Fuel Gas Code,
ANSI Z223.1 / NFPA54, Natural Gas and Propane Installation
Code
, CSA B149.1, or
Propane Storage and Handling Code
,
B149.2), as applicable.
To prevent fire and smoke damage, remove all packaging material •
before operating side burner.
Before you start cooking, clean the entire side burner thoroughly
•
with hot, soapy water. This is necessary to remove residual sol-
vents, oil and grease used in the manufacturing process. The
grates should also be thoroughly cleaned in the same manner.