Instrument Cloning
Instrument Cloning
17
When a satisfactory instrument configuration has been
achieved, either from the initial configuration with the basic
parameter
settings, following Autotune or other further
adjustments, these settings can be
cloned
to other
instruments on the network or saved in a
file
for later use.
Suites of settings of all the instruments in an application can
similarly be
saved to a file
making it possible to re-configure
all of the instruments on a machine or process in a matter of
seconds, to optimise them to different task.
Cloning Settings
to another instrument on the bus.
Right Click
in the display window of the instrument
that settings are to be
cloned from
.
Click
the
clone
button in any of the pages of
the
Internal Parameters for instrument
(n)
screen to call up the
Clone data
page. The
Instruments on line
panel will
list all of the instruments on line by it's
Modbus address and either the default
instrument number or name/location
given during
Instrument Comms Setting
procedure.
To transfer an instrument or group of
instruments to the
Instruments to Clone
panel;
Click
anywhere on instrument title, to
highlight, or
Click/hold
a group of instrument titles, then
Click
the button to transfer the highlighted
instruments to the
Instruments to clone
panel
, then
Click
the
OK
button to clone them with the
settings from the original instrument.
