Cal Amp vanguard, Руководство пользователя

Страница: 20 / 69

19
LAN

IP
Displays LAN side static IP information for this device (the modem). Note: Once this IP address has been changed
and saved, the browser connection to the device will be lost. To continue configuration, please connect to the
(new) IP address / the address that has been entered and saved.

Subnet Mask
Displays the LAN side subnet mask for the modem

MAC Address
Media Access Control Address. Every Ethernet device (i.e. LAN cards) has a unique hardware serial number or MAC
address to identify each Network Device from all others.
System Information

Date
Displays the current date and time (UTC) as received from the cellular carrier. The date and time information is
updated at the start of each PPP connection, and then maintained internally until the modem is rebooted. If no
PPP connection has been made this boot cycle, the time display will not be accurate. This is not a user settable
function – it is controlled only by the carrier supplied date and time. Not all carriers support this function.

System Up time
Displays the system uptime in seconds:
―
1 minute = 60 seconds
― 1 hour = 3600 seconds
― 1 day = 86400 seconds
― 1 year = 31,536,000 seconds

Current Firmware Version
Displays the current modem firmware version loaded. Please visit www.calamp.com for the latest updates.

Kernel Date
Displays the date of the operating system kernel the unit is running

Phone Module Version
This will vary depending on the vendor of the radio module inside the modem.

Temperature
Displays the current internal temperature of the modem, as measured by the cellular radio module
PPP

PPP Status
Indicates the status of the PPP interface, usually UP when connected properly