Cal Amp Phantom II, Руководство по эксплуатации, Страница: 83 / 164

Phantom II
© CalAmp 83
Values
6.0 Configuration
Sleep Mode (Remote)
No Sleep: Sleep mode is disabled by default.
Auto Wakeup: Unit will wakeup from activity on serial port,
Ethernet port or radio data, if the Radio Awake Time is a nonzero
value. Power consumption is about 35-45 mA @ 12VDC.
Serial Port Wakeup: Unit will wakeup from serial port or radio data
if Radio Awake Time is nonzero value. Power consumption is about
15-25mA @ 12VDC.
Ethernet Port Wakeup: Unit will wakeup from Ethernet port or
radio data if Radio Awake Time is a nonzero value. Power
consumption is about 30-40mA @ 12VDC.
Power Shutdown: Timer control shutdown mode. Controlled by
Radio Awake Time and Radio Sleep Time parameters. System will
reboot when the radio wakes up. Power consumption is about 1mA
@ 12 VDC.
Values
No Sleep
No Sleep
Auto Wakeup
Serial Port Wakeup
Ethernet Port Wakeup
Power Shutdown
The Phantom II will enter sleep
mode after 60 seconds when the
system is rebooted.
Awake Time
Defines how long the unit will keep awake. If set to 0, the radio will
not wakeup until data is received from the serial or Ethernet port.
0-65535 (seconds)
Values