CAKEWALK sonar x3, Справочное руководство

Страница: 204 / 2094

204
Controlling playback
Track-by-track playback
Soloing tracks
Sometimes you want to hear a single track, or a few tracks at once, without having to mute all the
other tracks. You can do this by soloing the tracks you want to hear.
As soon as any track is marked as a solo track, SONAR ignores all mute settings (unless a soloed
track is also muted—mute takes precedence over solo) and plays only the track or tracks that are
set to solo. Any number of tracks at one time can be marked as solo. All these tracks will play
together. As soon as the solo status of the final solo track is turned off, SONAR once again plays
back tracks based on their mute settings.
To solo or unsolo individual tracks
• To solo or unsolo a track, click its Solo button in the Track, Console view or Track Inspector.
• To solo or unsolo several tracks at once, select the tracks and do one of the following:
• Right-click a track strip and choose MSR > Solo on the pop-up menu.
• To solo all selected tracks of the same track type, hold down the CTRL key and click any
selected track’s Solo button .
• To solo all tracks, hold down the CTRL key and click any non-selected track’s Solo button .
See also:
“Dim Solo mode” on page 205
To unsolo all tracks
Click the Solo / Unsolo All Tracks button in the Control Bar’s Mix module.
To solo all tracks
Do one of the following:
• Click the Solo / Unsolo All Tracks button in the Control Bar’s Mix module.
• Hold down the CTRL key and click any track’s Solo button .
See also:
“Dim Solo mode” on page 205
“Exclusive Solo mode” on page 206
“Solo Override” on page 207