CAKEWALK sonar x3, Справочное руководство

Страница: 1230 / 2094

1230
Instrument definitions
Assigning instruments
“Assigning the Bank Select method” on page 1240
“Assigning patch names” on page 1241
“Assigning note names” on page 1243
“Assigning controller, RPN, and NRPN names” on page 1245
Assigning instruments
SONAR lets you assign a MIDI instrument definition to each available MIDI output and channel. The
assignments you make determine the MIDI bank names, patch names, note names, and controller
names that you see during your SONAR session.
Suppose that you have a Roland GS-compatible synthesizer attached to MIDI output 1. By assigning
all 16 channels of MIDI output 1 to the Roland GS instrument definition, you ensure that the bank,
patch, note, and controller name lists you see displayed in SONAR are the same ones that you see
on the display screen of your synthesizer.
Often, you want to assign a different instrument to channel 10, which is usually used for percussion.
For example, you might assign the Roland GS instrument definition to channels 1 through 9 and 11
through 16, but you would most likely want to assign the Roland GS Drumsets instrument definition
to channel 10. That way, any SONAR tracks you assign to channel 10 on that output use the names
of drum sets for patch names, and drum notation in the Piano Roll view. If you have several MIDI
outputs, with a different MIDI module attached to each one, you would normally assign a different
instrument definition to each MIDI output.
For convenience, you can assign a block of channels to one instrument and then change the
assignment of one or more of those channels without changing the others. For example, you can
highlight all 16 channels of the first MIDI output and assign them to the Roland GS instrument
definition. Then, you can highlight channel 10 of that same MIDI output and assign it to the Roland
GS Drumset instrument definition. Channels 1 through 9 and 11 through 16 on the first MIDI output
will stay assigned to Roland GS.
If you only have one MIDI output, but have several MIDI modules attached to it, you can assign a
few channels to each module. For example, you might have a Roland synth receiving on MIDI
channels 1 through 9, a Roland drum machine receiving on channel 10, and a basic GM-compatible
synth receiving on channels 11 through 16. In this case, you’d use three different instrument
definitions for your one and only MIDI output.